• Enable ingress checking on the interface.
ras(config)# interface
37.2.8 frame-type
Syntax:
where |
|
<alltaggedu = | Choose to accept both tagged and untagged incoming frames, just |
ntagged> | tagged incoming frames or just untagged incoming frames on a port. |
An example is shown next.
•Enable ports one, three, four and five for configuration.
•Enable ingress checking on the ports.
•Enable tagged
ras(config)# interface
37.2.9 weight
Syntax:
| weight <wt1> <wt2> ... <wt8> |
where |
|
<wt1> <wt2> | ... = Sets the interface WFQ weighting. A weight value of one to eight is |
<wt8> | given to each variable from wt 1 to wt 8. |
An example is shown next.
•Enable WFQ queuing on the switch.
•Enable port two and ports six to twelve for configuration.
Chapter 37 Interface Commands | 293 |