Table 5 Navigation Panel Links (continued)
LINK | DESCRIPTION |
|
|
Routing Protocol |
|
|
|
Static Routing | This link takes you to screens where you can configure static routes. A static route |
| defines how the switch should forward traffic by configuring the TCP/IP parameters |
| manually. |
DiffServ | This link takes you to screens where you can configure DiffServ and DSCP settings. |
|
|
Management |
|
|
|
Maintenance | This link takes you to screens where you can perform firmware and configuration |
| file maintenance as well as reboot the system. |
Access Control | This link takes you to screens where you can change the system login password |
| and configure SNMP and remote management. |
Diagnostic | This link takes you to screens where you can view system logs and test port(s). |
|
|
Syslog | This link takes you to screens where you can setup system logs and a system log |
| server. |
Cluster | This link takes you to a screen where you can configure clustering management |
Management | and view its status. |
MAC Table | This link takes you to a screen where you can view the MAC addresses (and types) |
| of devices attached to what ports and VLAN IDs. |
ARP Table | This link takes you to a screen where you can view the MAC addresses – IP |
| address resolution table. |
Configure Clone | This link takes you to a screen where you can clone port attributes of a port and |
| transfer them to other port(s). |
4.4.1 Change Your Password
After you log in for the first time, it is recommended you change the default administrator password. Click Management, Access Control and then Logins to display the next screen.
56 | Chapter 4 The Web Configurator |