![](/images/backgrounds/127146/127146-337308x1.png)
group name
=A name to identify the MVR IP multicast group .
=Specifies the starting IP multicast address of the multicast group in dotted decimal notation.
=Specifies the ending IP multicast address of the multicast group in dotted decimal notation. Enter the same IP address as the start- address if you want to configure only one IP address for the multicast group.
•Enter MVR mode. Create a multicast VLAN with the name multiVlan and the VLAN ID of 3.
•Specify source ports
•Specify dynamic mode for the mutlicast group.
•Configure MVR multicast group addresses by the name of ipgroup.
•Exit MVR mode.
See the following example.
ras(config)# mvr 3 name multivlan
306 | Chapter 39 Multicast VLAN Registration Commands |