Table 45 Policy (continued)
LABEL | DESCRIPTION |
|
|
Diffserv | Select No change to keep the TOS and/or DSCP fields in the packets. |
| Select Set the packet’s TOS field to set the TOS field with the value you configure in |
| the TOS field. |
| Select Replace the IP TOS with the 802.1 priority value to replace the TOS field |
| with the value you configure in the Priority field. |
| Select Set the Diffserv Codepoint field in the frame to set the DSCP field with the |
| value you configure in the DSCP field. |
Outgoing | Select Send the packet to the mirror port to send the packet to the mirror port. |
| Select Send the packet to the egress port to send the packet to the egress port. |
| Select Send the matching frames (broadcast or DLF, multicast, marked for |
| dropping or to be sent to the CPU) to the egress port to send the broadcast, |
| multicast, DLF, |
| Select Set the packet’s VLAN ID to set the VLAN ID of the packet with the value you |
| configure in the VLAN ID field. |
Metering | Select Enable to activate bandwidth limitation on the traffic flow(s) then set the |
| actions to be taken on |
Select the action(s) to be performed for | |
action | Select Drop the packet to discard the |
| |
| Select Change the DSCP value to replace the DSCP field with the value specified in |
| the Out of profile DSCP field. |
| Select Set |
| network is congested. |
| Select Do not drop the matching frame previously marked for dropping to queue |
| the frames that are marked to be dropped. |
Add | Click Add to inset the entry to the summary table below. |
|
|
Cancel | Click Cancel to reset the fields back to your previous configuration. |
|
|
Clear | Click Clear to set the above fields back to the factory defaults. |
|
|
19.3 Viewing and Editing Policy Configuration
To view a summary of the classifier configuration, scroll down to the summary table at the bottom of the Policy screen. To change the settings of a rule, click a number in the Index field.
Figure 65 Policy: Summary Table
156 | Chapter 19 Policy Rule |