ES-3124 User’s Guide

CHAPTER 38

IEEE 802.1Q Tagged VLAN

Commands

This chapter describes the IEEE 802.1Q Tagged VLAN and associated commands.

38.1 Configuring Tagged VLAN

The following procedure shows you how to configure tagged VLAN.

1Use the IEEE 802.1Q tagged VLAN commands to configure tagged VLAN for the switch.

Use the vlan <vlan-id>command to configure or create a VLAN on the switch. The switch automatically enters the config-vlanmode.Use the inactive command to deactivate the VLAN(s).

Use the interface port-channel <port-list> command to enter the config- interface mode to set the VLAN settings on a port, then use the pvid <vlan-id>command to set the VLAN ID you created for the port-list to that specific port in the PVID table.

Use the exit command when you are finished configuring the VLAN.

ras (config)# vlan 2000 ras (config-vlan)# name up1 ras (config-vlan)# fixed 10-12

ras (config-vlan)# no untagged 10-12 ras (config-vlan)# exit

ras (config)# interface port-channel 10-12 ras (config-interface)# pvid 2000

ras (config-interface)# exit

2Configure your management VLAN.

Use the vlan <vlan-id>command to create a VLAN (VID 3 in this example) for managing the switch, and the switch will activate the new management VLAN.

Use the inactive command to disable the new management VLAN.

ras (config)# vlan 3

ras (config-vlan)# inactive

Chapter 38 IEEE 802.1Q Tagged VLAN Commands

297