ES-3124 User’s Guide

An example is shown next.

Select ports 33-36 for internal loopback test.

Execute the test command.

View the results.

ras(config)# interface port-channel 33-44 ras(config-interface)# test 33-36

Testing internal loopback on port 33 :Passed! Ethernet Port 33 Test ok.

Testing internal loopback on port 34 :Passed! Ethernet Port 34 Test ok.

Testing internal loopback on port 35 :Passed! Ethernet Port 35 Test ok.

Testing internal loopback on port 36 :Passed! Ethernet Port 36 Test ok.

37.3 Interface no Command Examples

Similar to the no commands in the Enable and Config modes, the no commands for the Interface sub mode also disable certain features. In this mode, however, this takes place on a port by port basis.

37.3.1 no bandwidth-limit

You can disable bandwidth limit on port 1 simply by placing the no command in front of the bandwidth-limit command.

Syntax:

no bandwidth-limit

An example is shown next:

• Disable bandwidth limit on port1

ras(config)# interface port-channel 1 ras(config-interface)# no bandwidth-limit

296

Chapter 37 Interface Commands