34.11.5 config-vlan Commands
The following table lists the vlan commands in configuration mode.
Table 86 Command Summary:
COMMAND |
| DESCRIPTION | PRIVILEGE | |
|
|
|
|
|
vlan <1- |
|
| Creates a new VLAN group. | 13 |
4094> |
|
|
|
|
| name |
| Specifies a name for identification | 13 |
|
|
| purposes. |
|
| normal <port- |
| Specifies the port(s) to dynamically | 13 |
| list> |
| join this VLAN group using GVRP |
|
| fixed <port- |
| Specifies the port(s) to be a | 13 |
| list> |
| permanent member of this VLAN |
|
|
|
| group. |
|
| forbidden <port- |
| Specifies the port(s) you want to | 13 |
| list> |
| prohibit from joining this VLAN |
|
|
|
| group. |
|
| untagged <port- |
| Specifies the port(s) you don’t want | 13 |
| list> |
| to tag all outgoing frames |
|
|
|
| transmitted with this VLAN Group |
|
|
|
| ID. |
|
| inactive |
| Disables the specified VLAN. | 13 |
| help |
| Displays a list of available VLAN | 13 |
|
|
| commands. |
|
| no | fixed <port- | Sets fixed port(s) to normal port(s). | 13 |
|
| list> |
|
|
|
| forbidden | Sets forbidden port(s) to normal | 13 |
|
| port(s). |
| |
|
| untagged <port- | Enables VLAN tagging for outgoing | 13 |
|
| list> | traffic on the specified port(s). |
|
|
| inactive | Enables the specified VLAN. | 13 |
|
| ip address | Sets the default | 13 |
|
| to use a static IP address in this |
| |
|
| VLAN. |
| |
|
| The switch will use the default IP |
| |
|
|
|
| |
|
|
| address of 0.0.0.0 if you do not |
|
|
|
| configure a static IP address. |
|
|
| ip address <ip- | Deletes the IP address and subnet | 13 |
|
| address> <mask> | mask from this VLAN. |
|
|
| ip address | Deletes the default gateway from | 13 |
|
| this VLAN. |
| |
| exit |
| Leaves the VLAN configuration | 13 |
|
|
| mode. |
|
| ip address | Sets the dynamic | 13 | |
|
| address. |
|
Chapter 34 Introducing Commands | 263 |