• Set the queue weights from Q0 to Q7.
ras# configure ras(config)# wfq
ras(config)# interface
37.2.10 egress set
Syntax:
egress set
where
= Sets the outgoing traffic port list for a |
An example is shown next.
•Enable
•Enable ports one, three, four and five for configuration.
•Set the outgoing traffic ports as the CPU (0), seven (7), eight (8) and nine (9).
ras(config)#
37.2.11 qos priority
Syntax:
qos priority <0 .. 7>
where
<0 .. 7> | = Sets the quality of service priority for a port. |
An example is shown next.
•Enable ports one, three, four and five for configuration.
•Set the IEEE 802.1p quality of service priority as four (4).
ras(config)# interface
294 | Chapter 37 Interface Commands |