Table 56 MVR: Group Configuration
LABEL | DESCRIPTION |
|
|
MVLAN | This field displays the multicast VLAN ID. |
|
|
Name | This field displays the descriptive name for this setting. |
|
|
Start Address | This field displays the starting IP address of the multicast group. |
|
|
End Address | This field displays the ending IP address of the multicast group. |
|
|
Delete | Select Delete Group and click Delete to remove the selected entry(ies) from the table. |
|
|
Cancel | Select Cancel to clear the checkbox(es) in the table. |
|
|
22.7.1 MVR Configuration Example
The following figure shows a network example where ports 1, 2 and 3 on the switch belong to VLAN 1. In addition, port 17 belongs to the multicast group with VID 200 to receive multicast traffic (the News and Movie channels) from the remote streaming media server, S. Computers A, B and C in VLAN are able to receive the traffic.
Figure 76 MVR Configuration Example
To configure the MVR settings on the switch, create a multicast group in the MVR screen and set the receiver and source ports.
180 | Chapter 22 Multicast |