ES-3124 User’s Guide

Table 85 interface port-channel Commands (continued)

COMMAND

DESCRIPTION

PRIVILEGE

 

 

 

 

 

 

pvid <1-4094>

 

The default PVID is VLAN 1 for all

13

 

 

 

ports. Sets a PVID in the range 1 to

 

 

 

 

4094 for the specified interface.

 

 

ingress-check

 

Enables the device to discard

13

 

 

 

incoming frames for VLANs that

 

 

 

 

are not included in a port member

 

 

 

 

set.

 

 

gvrp

 

Enables this function to permit

13

 

 

 

VLAN groups beyond the local

 

 

 

 

switch.

 

 

frame-type

 

Choose to accept both tagged and

13

 

<alltaggedunt

 

untagged incoming frames, just

 

 

agged>

 

tagged incoming frames or just

 

 

 

untagged incoming frames on a

 

 

 

 

port.

 

 

name <port-

 

Sets a name for the port(s). Enter

13

 

name-string>

 

a descriptive name (up to nine

 

 

 

 

printable ASCII characters).

 

 

vlan-trunking

 

Enables VLAN Trunking on ports

13

 

 

 

connected to other switches or

 

 

 

 

routers (but not ports directly

 

 

 

 

connected to end users) to allow

 

 

 

 

frames belonging to unknown

 

 

 

 

VLAN groups to pass through the

 

 

 

 

switch.

 

 

flow-control

 

Enables interface flow control.

13

 

 

 

Flow control regulates

 

 

 

 

transmissions to match the

 

 

 

 

bandwidth of the receiving port.

 

 

bandwidth-limit

 

Enables ingress (pir), cir and

13

 

 

 

egress limits on the port(s).

 

 

 

cir

Enables the guaranteed bandwidth

13

 

 

 

limits for incoming traffic on the

 

 

 

 

port(s).

 

 

 

cir <Kbps>

Sets the guaranteed bandwidth

13

 

 

 

allowed for incoming traffic on the

 

 

 

 

port(s).

 

 

 

pir

Enables bandwidth limits allowed

13

 

 

 

for incoming traffic on the port(s).

 

 

 

pir <Kbps>

Sets the maximum bandwidth

13

 

 

 

allowed for incoming traffic on the

 

 

 

 

port(s).

 

 

 

egress

Enables bandwidth limits allowed

13

 

 

 

for outgoing traffic on the port(s).

 

 

 

egress <Kbps>

Sets the maximum bandwidth

13

 

 

 

allowed for outgoing traffic on the

 

 

 

 

port(s).

 

 

broadcast-limit

 

Enables broadcast storm control

13

 

 

 

limit on the switch.

 

 

 

<pkt/s>

Sets how many broadcast packets

13

 

 

 

the interface receives per second.

 

260

Chapter 34 Introducing Commands