Table 21 | FIltering (continued) | |
|
|
|
LABEL |
| DESCRIPTION |
|
|
|
Action |
| Select Discard source to drop frame from the source MAC address (specified in the |
|
| MAC field). The switch can still send frames to the MAC address. |
|
| Select Discard destination to drop frames to the destination MAC address (specified in |
|
| the MAC address). The switch can still receive frames originating from the MAC |
|
| address. |
|
| Select Discard source and Discard destination to block traffic to/from the MAC |
|
| address specified in the MAC field. |
MAC |
| Type a MAC address in valid MAC address format, that is, six hexadecimal character |
|
| pairs. |
VID |
| Type the VLAN group identification number. |
|
|
|
Add |
| Click Add to save this rule to the the switch’s |
|
| rule if it is turned off or loses power, so use the Save link on the top navigation panel to |
|
| save your changes to the |
Cancel |
| Click Cancel to reset the fields. |
|
|
|
Clear |
| Click Clear to clear the fields to the factory defaults. |
|
|
|
Index |
| This field displays the index number of the rule. Click an index number to change the |
|
| settings. |
Active |
| This field displays Yes when the rule is activated and No when is it deactivated. |
|
|
|
Name |
| This field displays the descriptive name for this rule. This is for identification purpose |
|
| only. |
MAC |
| This field displays the source/destination MAC address with the VLAN identification |
Address |
| number to which the MAC address belongs. |
VID |
| This field displays the VLAN identification number. |
|
|
|
Action |
| This field displays the filtering action (Discard both, Discard source or Discard dest.). |
|
|
|
Delete |
| Check the rule(s) that you want to remove in the Delete column and then click the |
|
| Delete button. |
Cancel |
| Click Cancel to clear the selected checkbox(es) in the Delete column. |
|
|
|
106 | Chapter 10 Filtering |