![](/images/backgrounds/127146/127146-337260x1.png)
Table 84 Command Summary: Configuration Mode (continued)
COMMAND |
|
| DESCRIPTION | PRIVILEGE |
|
|
|
|
|
| <index> start- |
| Specifies a group of trusted | 13 |
| addr <ip> end- |
| computer(s) from which an |
|
| addr <ip> service |
| administrator may use a service |
|
|
| to manage the switch. |
| |
| <[telnet] [ftp] |
|
| |
| [http] [icmp] |
|
|
|
| [snmp] [ssh] |
|
|
|
| [https]> |
|
|
|
admin- |
| Changes the administrator | 14 | |
password |
| password. |
| |
syslog |
|
| Enables syslog logging on the | 13 |
|
|
| switch. |
|
| server <ip- |
| Enables syslog logging to the | 13 |
| address> |
| specified syslog server. |
|
| server <ip- | inactive | Disables syslog logging to the | 13 |
| address> |
| specified syslog server. |
|
|
| level [0 ~ 7] | Sets the IP address of the syslog | 13 |
|
|
| server and the severity level. |
|
| type <type> |
| Sets the log type and the file | 13 |
| facility [local 1 |
| location on the syslog server. |
|
| ..7] |
|
|
|
vlan- |
|
| Enables VLAN stacking on the | 13 |
stacking |
|
| switch. |
|
| <SPTPID> |
| Sets the SP TPID (Service | 13 |
|
|
| Provider Tag Protocol Identifier). |
|
default- |
| Specifies through which traffic | 13 | |
management | band> |
| flow the switch is to send packets. |
|
ssh |
| Adds a remote host to which the | 13 | |
|
| switch can access using SSH |
| |
| <1024ssh- |
| service. |
|
|
|
|
| |
| <key> |
|
|
|
https | cert- |
| 13 | |
| regeneration |
|
|
|
| <rsadsa> |
|
|
|
| timeout <0- |
| Sets the HTTPS timeout period. | 13 |
| 65535> |
|
|
|
multi- |
|
| Enables | 14 |
login |
|
|
|
|
mvr <vlan- |
|
| Enters the MVR (Multicast VLAN | 13 |
id> |
|
| Registration) configuration mode. |
|
|
|
|
| |
|
|
| for more information. |
|
|
| Enables DHCP relay. | 13 | |
|
| Sets the IP addresses of up to 3 | 13 | |
| <svr_ip> |
| DHCP servers. |
|
| [svr2_ip] |
|
|
|
| [svr3_ip] |
|
|
|
258 | Chapter 34 Introducing Commands |