ZyXEL Communications omni.net LCD+M manual 140

Technical Reference for ZyXEL omni.net series

All the Following Commands Require a 'AT' Prefix

	AT Com.		Options		Function & Description	Reference
CSn			n=0-3	Suspend a call, 'n' is the call identifier (DSS1).
		(0 *)
CT					Clear buffer and start the embedded protocol analyzer. Capture data
				immediately and start timer.
C$				Invoke the interpretation function of the embedded protocol analyzer
				and display the results on DTE.
Ds					Dial 's' (numbers and options) that follows (see also S38b0, S35b4).
				The options for 's' are listed as follows:
		,		Pause for a time specified in S8. Remaining digits will be dialed as
				in-band DTMF.
			Y0 (*)		Unknown type of number
			Y1		International number
			Y2		National number
			Y3	Network specific number
			Y4		Subscriber number
			Y6	Abbreviated number
			Z0 (*)		Type of sub-address - NSAP with AFI=$50,
				IA5 characters
			Z2		Type of sub-address - user specified, IA5 characters
			N0 (*)		Unknown numbering plan
			N1	ISDN/Telephony numbering plan (CCITT E.164/E.163)
			N3	Data numbering plan (CCITT X.121)
			N8	National standard numbering plan
			N9	Private numbering plan
		/			Called party sub-address delimiters
The format of 's' is:				[[Yn][Nn]called_party_number][[W][,]]inband_dtmf_number
					or
				[[Yn][Nn]called_party_number][/[Zn]called_party_subaddress/]
DAs					Dial 's' (number and options) that follows for the POTS port, Phone
				1.
DBs					Dial 's' (number and options) that follows for the POTS port, Phone
				2.

A-6