ZyXEL Communications omni.net LCD+M Extended S-Registers"ATSn=x

Technical Reference for ZyXEL omni.net series

Extended S-Registers "ATSn=x"

All the Following Commands Require a 'AT' Prefix

	S Com.		bit		dec			hex		Function and description	+Def./Ref.
S14=			bit		dec			hex		Bit mapped register	+002
		0		0		0			omni.net auto-handshake mode on originate mode.
				1		1			omni.net auto-handshake mode on answer mode.
S15=			bit		dec			hex		Bit mapped register	+130
		0,1		0		0			Even parity
				2		2 (*)				No parity
		2		0		0 (*)				1 stop bit
		4,3		0		0 (*)				10-bit character length	*C0
		7-5		0		0			Profile 0 as active settings after power on.		Z0
				32		20			Profile 1 as active settings after power on.		Z1
				64		40			Profile 2 as active settings after power on.		Z2
				96		60			Profile 3 as active settings after power on.		Z3
				128		80			Factory default as active settings after power on.		Z4
						(*)
S16=					dec			Hex		Test status register.	+000
				0		0			No test in progress.
				9		9			Loopback test in progress.		&T9
				10			A			Loopback with self-test in progress.	&T10
				11			B			Loopback from B1, through switch, to B2.	&T11
S18=					dec				Force omni.net to fix DTE baud rate when idle.		+000
				0 (*)						Disable fixed baud function
				1-14,			1-E,		Enable baud rate to be fixed when answering.
				32		20			Baud rate value settings same as S20, except for S18=32 at
									230400 bps.

B-6