ZyXEL Communications omni.net LCD+M manual 141

Technical Reference for ZyXEL omni.net series

All the Following Commands Require a 'AT' Prefix

	AT Com.	Options				Function & Description	Reference
DIs				Dial 's' (number and options) that follows for ISDN data call.
DL				Repeat last ATD command.
DMs				Dial ‘s’ (number and options) that follows for the internal fax/modem
				(LCD+M only)
DNn		n=0-1		Set the Directory Numbers (USA.)
		DN0=xxx			Set the DN0 value.
		DN0=			Clear the DN0.
		DN?		Query present DNs.
DSn		n=0-39		Dial number stored in non-volatile RAM (NVRAM) at location 'n'.			S44b3
				Use '+' to dial two consecutive numbers for bundling or MPPP calls.
En				Control local echo of keyboard commands.			S23b0
		E0			Echo off
		E1	(*)		Echo on
Hn				On/Off Hook control
		H0	(*)		Hang up (on-hook) the ISDN Data Call, same as 'ATH'.
		H1			Go off-hook.
		H3		Hang up the POTS port, Phone 1.
		H4		Hang up the POTS port, Phone 2.
HWR					Hardware reset		S38b2
In				Display inquired information.
		I0			Display product code, same as 'ATI'.
				Results:
				1291		(USA)
				1292		(DSS1)
				1293		(1TR6)
		I1			Display product information and ROM checksum.
				Results: ZyXEL omni.net (LCD/Plus/D)<switch>: V x.xx
				where <switch>= USA, DSS1, or 1TR6.
		I3		Display link status report (See Description of ATI3 Output)

A-7