ZyXEL Communications omni.net LCD+M manual 163

Technical Reference for ZyXEL omni.net series

All the Following Commands Require a 'AT' Prefix

	S Com.		bit		dec		hex			Function and description	+Def./Ref.
				1		1			Can NOT get busy tone from Phone 1.
		1		0		0			Can get busy tone from Phone 2.
				2		2			Can NOT get busy tone from Phone 2.
		2		0 (*)		0				Disable the 'RING' message to DTE port for analog call.
				4		4			Enable the 'RING' message to DTE port for analog call.
S79=			bit		dec		hex		Bit mapped register.		+000
		0		0 (*)		0				Ignore POTS port 1 global incoming call when port 1 is busy.
				1		1			Discard POTS port 1 global incoming call when port 1 is
									busy (Sending RELEASE COMPLETE).
		0		0 (*)		0				Ignore POTS port 2 global incoming call when port 2 is busy.
				2		2			Discard POTS port 2 global incoming call when port 2 is
									busy (Sending RELEASE COMPLETE).
		2		0		0			POTS 1 call-waiting/multiple-answer disabled.
				4 (*)		4				POTS 1 call-waiting/multiple-answer enabled.
		3		0		0			POTS 2 call-waiting/multiple-answer disabled.
				8 (*)		8				POTS 2 call-waiting/multiple-answer enabled.
		4		0 (*)		0				POTS port 1 is connected to a telephone.
				16		10			POTS port 1 is connected to a Fax/Modem.
		5		0 (*)		0				POTS port 2 is connected to a telephone.
				32		20			POTS port 2 is connected to a Fax/Modem.
		7		0 (*)		0				Sending RELEASE COMPLETE will cause 'call reject’ for
									'ATH1'.
				128		80			Sending RELEASE COMPLETE will cause 'user busy’ for
									'ATH1'.
S80=			bit		dec		hex		Bit-mapped register		+000
		4		0 (*)		0				Not sending Low Layer Compatibility information for POTS
									port 2.
				16		10			Sending Low Layer Compatibility information for POTS port
								2.
		6		0 (*)		0				Not sending Low Layer Compatibility information for ISDN
									data call.
											B-11