ZyXEL Communications omni.net LCD+M Setting S-registers

Technical Reference for ZyXEL omni.net series

To view all of the S-register settings use the '&Vn' AT command:

#AT&Vn

The following table summarizes the S-register viewing commands.

	S-register Viewing AT			Description
		Commands
ATSr			r=0-124	Display the value stored in S-register 'r'.
AT&Vn			n=0-7	View all of the S-register settings.
			&V0	View S-register settings for current active profile.
			&V1 to &V4	View settings for user profile number (n-1).
			&V5	View the factory set default settings.
			&V6	View the POTS port 1 setting, Phone 1. (for omni.net LCD/Plus).
			&V7	View the POTS port 2 setting, Phone 2. (for omni.net LCD/Plus).

Note: The S-register values may be displayed in either Decimal or Hexadecimal format when using the preceding commands. Bit 3 of S-register 84 sets which numbering system is used for display.

ATS84b3=0	Display in decimal format.
ATS84b3=1	Display in Hex format.

For example, to display the value of bit 'm' of S-register 'r', use:

! ATSrbm?

Table 72. S-register Viewing AT Commands

Setting S-registers

In order to change the value in S-register 'r' to value 'n', use:

!ATSr=n (range 0-255)

In order to change the value in a specific bit 'm' of S-register 'r', use:

!ATSrbm=n (range 0-1)

In both commands, 'n' is a decimal number in the given range. While the first command modifies all

B-2