ZyXEL Communications omni.net LCD+M manual 169

Technical Reference for ZyXEL omni.net series

All the Following Commands Require a 'AT' Prefix

	S Com.		bit		dec			hex		Function and description	+Def./Ref.
				16		10			Use Speech Bearer service whenever possible for POTS
									port, Phone 2.
		5		0 (*)		0				Use 3.1KHz Bearer service whenever possible for POTS
									port, Phone 1.
				32		20			Use Speech Bearer service whenever possible for POTS
									port, Phone 1.
		6		0 (*)		0				Enable the a/b adapter to accept global calls.
				64		40			Forbid the POTS port to accept global calls.
		7		0 (*)		0				Enable analog incoming calls.
				128		80				Reject analog incoming calls.
									(pure ISDN data).
S119=			bit		dec		hex
		0		0 (*)		0				Disable callback function (See 'AT*CG).
				1		1				Enable callback function.
		1		0 (*)		0				D-channel layer-2(LAPD) 'point-to-multipoint' operation
									mode.
									(dynamic TEI, 64 <= n <= 126).
				2		2			D-channel layer-2(LAPD) 'point-to-point' operation mode.
									(static TEI=0).
		2		0 (*)		0				Disable 'overlap receiving' signaling function.
									(for ISDN supplementary service 'MSN').
				4		4			Enable 'overlap receiving' signaling.
									(for ISDN supplementary service DDI).
		3		0 (*)		0				When no MSN (EAZ) is matched, the inbound call will be
									ignored.
									Note: default = 1 for USA, default = 0 for other
				8		8			When no MSN (EAZ) is matched, use default protocol to
									accept.
		4		0		0			V.110 user rate = 19200 bps if DTE speed greater than
									19200 bps
				16		10			V.110 user rate = 38400 bps if DTE speed greater than
				(*)					38400 bps

B-17