ZyXEL Communications omni.net LCD+M manual 142

Technical Reference for ZyXEL omni.net series

					All the Following Commands Require a 'AT' Prefix
	AT Com.		Options		Function & Description	Reference
			I9		Display Microsoft PnP code.
			I11	Display PPP status.
JAn			n=0-255	Add-threshold for PPP/MP Bandwidth-On-Demand		S126
		(48 *)		in Kbps unit
JSn			n=0-255	Sub-threshold for PPP/MP Bandwidth-On-Demand		S127
		(32 *)		in Kbps unit
KAxn			n=0-63	Add-persist time interval for BOD; BOD disabled if n=0.		S85b1-7
		(0 *)		x= M(in Minute unit) or S(in Second unit)
KSxn			n=0-63	Sub-persist time interval for BOD; BOD disabled if n=0.		S125b1-7
		(0 *)		x= M(in Minute unit) or S(in Second unit)
Ln			n=0-3	to control speaker volume		S24b4-5
			L0	Low volume.
			L1	Low volume. (Default.)
			L2	Medium volume.
			L3		High volume.
Mn			n=0-3		select when the speaker will be on or off	S21b1-2
			M0		Speaker is always off.
			M1		Speaker is on during call establishment, but off when receiving
				carrier. (Default.)
			M2		Speaker is always on.
			M3		Speaker on after the last digit is dialed out and off when carrier is
				detected.
MW					For USA NI-1 message waiting service, disable the audible &
				feature message waiting.
O					Return to on-line state
Pn			n=0-6	D-channel protocol selection (USA) for American Version
			P0 (*)		Northern Telecom proprietary ISDN
			P1		National ISDN 1 (1 SPID)
			P2		National ISDN 1 (2 SPID)
			P3		Reserved
A-8