ZyXEL Communications omni.net LCD+M manual 160

Technical Reference for ZyXEL omni.net series

All the Following Commands Require a 'AT' Prefix

	S Com.		bit		dec		hex		Function and description					+Def./Ref.
S23=			bit		dec		hex		Bit mapped register				+105
		0		0		0			Command echo disabled.					E0
				1		1			Command echo enabled.					E1
		2		0		0		Insertion is not allowed during a phone call.
				4		4		Insertion is allowed during a phone call.
		3-5		0		0		ATX0 (See result code table).
				8		8		ATX1		dec	hex	AT
				16		10		ATX2		40	28	X5
				24		18		ATX3		48	30	X6
				32		20		ATX4		56	38	X7
		6		0		0		Display result code in numeric format (see S35b7).						V0
				64		40		Display result code in verbose format.						V1
		7		0		0		omni.net returns result code.						Q0
				128		80		omni.net does not return result code (see S40b1).						Q1
S24=			bit		dec		hex	Bit mapped register					+34
		2		0		0		Ignore the setting of S21(b1-2) when Phone 1 keypad-dial.
				1		1		The setting of S21(b1-2) will be affected to Phone 1
								keypad-dial.
		3		0		0		Ignore the setting of S21(b1-2) when Phone 2 keypad-dial.
				1		1		The setting of S21(b1-2) will be affected to Phone 2
								keypad-dial.
		6		0		0		POTS Port tone volume low.
				1		1		POTS Port tone volume high.
S27=			bit		dec		hex		Bit mapped register				+156
		0-2							Modem data compress (for omni.net LCD+M only)
		3-5		0		0		DTE port Flow Control disabled.						&H0
				24		18		DTE port Hardware (RTS/CTS) flow control.						&H3
				40		28		Reserved.						&H5

B-8