ZyXEL Communications omni.net LCD+M Extended 'AT*' Command Set

Technical Reference for ZyXEL omni.net series

Extended 'AT*' Command Set

All the Following Commands Require a 'AT' Prefix

	AT Com.	Options		Function & Description	Reference
*Cn				Character length, including start, stop and parity bit.	S15b3-4
		*C0 (*)		DTE port 10-bit character length.
*Dn		n=0-39		Set default dial pointer at telephone directory location 'n'.	S29
		*D0 (*)		(See also S35b4 and S38b0)
*Gn				Security function selection.	S36b5-7
		*G0 (*)		Disable security function.
		*G1	Enable type 1 security, with password check (Proprietary).
		*G2		Enable type 1 security, with password check and call back
			(Proprietary).
		*G3	Enable type 2 security, with password check.
		*G4		Enable type 2 security, with password check and call back.
		*G5		Enable type 2 security, with password check and call back,
			remote site enters the call back number.
*GCn		n=0-1		Call-back function selection.	S119b0
		*GC0 (*)		Disable call-back function.
		*GC1	Enable call-back function.
*HCn		n=0-4		Assign call-back phone number, 's' to storage location, 'n'.
*Hn		n=0-39		Modify user password table at location 'n'.
*HS			Modify supervisory password (Default:: See User's Manual)
*T				Recall the last CND (Caller ID) information.
*V				View the password table.
*VC			View the call-back number table.
Fax *VC				View the call-back number table.

Table 71. Extended 'AT*' Command Set

A-16