ZyXEL Communications omni.net LCD+M manual 148

Technical Reference for ZyXEL omni.net series

All the Following Commands Require a 'AT' Prefix

	AT Com.	Options		Function & Description	Reference
		&V1-4		View the (n-1)th user profile settings (n=1-4).
		&V5		View factory-set default settings.
		&V6		View POTS port, Phone 1 setting.
		&V7		View POTS port, Phone 2 setting.
&Wn		n=0-3		Write current settings to user profile 'n' in NVRAM.
			(See also S35b6)
&Z?				Display all the phone numbers stored in NVRAM.
&Zn=s		n=0-39		Write phone number 's' to NVRAM at location 'n' (n=0-39).
			Use AT*Dn or ATS29=n to set the default dial pointer.
&ZIn=s		n=0-7	Assign the phone number (including subaddress, if any) for
		s=phone	various B-channel protocols. In answer mode, these numbers
			will be compared with the received called_party_number and
		number
			called_party_subaddress information. The call will be accepted
			using the specific protocol if the assigned number of this protocol
			matches with the called_party_number.
		&ZI0=s		Assign the phone number for X.75.
		&ZI1=s		Assign the phone number for V.110.
		&ZI2=s		Assign the phone number for V.120.
		&ZI3=s		Assign the phone number for PPP, PPP/MP.
		&ZI4=s		Assign the phone number for ISDN data.
			(Multi-Auto Answering, auto detect the protocols.)
		&ZI6=s		Assign the phone number for POTS port, Phone 2 and modem.
		&ZI7=s		Assign the phone number for POTS port, Phone 1.
&ZI?				Display the phone number (including subaddress, if any) for
			various B-channel protocols.
&ZFn=s		n=0-4	For USA NI-1 switch only, assign the relative ISDN Ordering
		s=0-63	Code, IOC (or dial access code) for each supplementary
			service.
		&ZF0=s		Assign the IOC for Conference.
		&ZF1=s		Assign the IOC for Drop.
		&ZF2=s		Assign the IOC for Transfer.

A-14