ZyXEL Communications omni.net LCD+M manual 162

Technical Reference for ZyXEL omni.net series

All the Following Commands Require a 'AT' Prefix

	S Com.		bit		dec			hex	Function and description		+Def./Ref.
S41=			bit		dec			hex	Bit mapped register	+000
		3		8		8			Enable CCITT signals 140 and 141 on EIA-232D interface.
		5		32		20			DSR follows DCD and pulses (see S44b4).		&Sn
		6		64		40			Force S0>=2.		S0
S42=			bit		dec			hex	Bit mapped register	+000
		3		8		8			Disable escape sequence code in answer mode.
		6		64		40			Disable <RINGING> result code.		Xn
		7		128		80			DCD forced on, but pulse off for 0.5 seconds at carrier loss.		&C0
S44=			bit		dec			hex	Bit mapped register	+000
		3		8		8			'ATDSn' initiates auto-dial of the stored numbers		&Zn
									consecutively until connection is made.		S38b0
		4		16		10			DSR follows DTR (see also S41b5).		&Sn
S50=				0-25					Inactivity timer for RS 232 port.	+000
				5					This timer counts when there is no data flow in or out of the
									RS 232 serial port; omni.net will hang up , when timed out.
									Units is 10 seconds.
									'000' disables timer.
S56=				0-25			0-FF		Hook flash detected time for POTS port adapter, in units of	+050
				5					10ms.
									Default setting 50 = 0.5 seconds.
S57=			fax		Class
S61=			bit		dec		hex
		3		0 (*)		0			MP data sent in rotate mode.
				1		1			MP data sent in split mode.
S64=					dec			hex		+005
				0-25			0-FF		Security callback timer in unit of 1 second.
				5
S78=			bit		dec			hex	Bit mapped register
		0		0 (*)		0			Can get busy tone from Phone 1.

B-10