Technical Reference for ZyXEL omni.net series

NOTE:

1:If you disable the call waiting function (S79.2=0 or S79.3=0), the second incoming call will be blocked.

2:If you configure the POTS port for Modem/Fax connection (S79.4=1 or S79.5=1), the call waiting feature of the respective POTS port will be always disabled.

There are several ways to deal with a second incoming call.

1.Accept the call

Press the Flash key and 0 to accept the second call and put the current call on hold.

2.Reject the call

Press the Flash key and 5 to reject the second incoming call.

3.Establish a 3-Way Conference

Press the Flash key and 3 to establish the three-way conference.

Call Broker

The call broker function enables you to switch back and forth between the first and second calls by pressing the Flash key and 0.

When you accept a second call, you can use the call broker function to switch back and forth between caller B and C.

Step 1. Switch to caller C

Press the Flash key and 0 to switch to second caller C.

Step 2. Return to caller B

Press the Flash key and 0 again to switch back to caller B.

6-4