ZyXEL Communications omni.net LCD+M manual 170

Technical Reference for ZyXEL omni.net series

All the Following Commands Require a 'AT' Prefix

	S Com.		bit		dec			hex		Function and description	+Def./Ref.
		5		0 (*)		0				Enable normal MSN function	&ZIn
				32		20			Treat the number assigned by '&ZI=n...' as sub-address, and
									match with the called_party_subaddress for inbound call
									routing.
S120=			bit		dec		hex
		0		0 (*)		0				Enable POTS port 1 call out.
				1		1			Disable POTS port 1 call out.
		1		0 (*)		0				Enable POTS port 2 call out.
				2		2			Disable POTS port 2 call out.
		2		0 (*)		0				Enable multi-answering while omni.net LCD MSN is not
									assigned.
				4		4			Handle incoming call according to 'AT&Ln' setting.
		3		0 (*)		0				If S120b2=1 is set and the POTS port is busy, this call will be
									routed to another POTS port.
				8		8			If S120b2=1 is set and the POTS port is busy, this call will be
									rejected.
		4		0 (*)		0				Enable omni.net LCD to accept global calls for a/b adapter
									and ISDN data.
				16		10			Forbid omni.net LCD to accept incoming calls with MSN
									unmatched for a/b adapter and ISDN data.
									(including global calls, see 'AT&ZI=s')
		5		0 (*)		0				Reserved.
		6		0 (*)		0				Disable supplementary service 'CLIR' (Calling Line
									Identification Restriction).
				64		40			Enable supplementary service 'CLIR' (Calling Line
									Identification Restriction).
		7		0		0			Feature (flex)phone functions are enabled when pressing
									Flash key on the phone set.
				128		80			Supplementary service functions are enabled when pressing
									Flash key on phone set.
									(For USA default=1, for DSS1 default=0)
S121=			bit		dec		hex

B-18