Technical Reference for ZyXEL omni.net series

connected to a POTS port in order to activate or deactivate the CFV function.

In most cases, dialing [*73<forwarded_number>] will activate CFV and dialing [*73] will disable it. Please check with your telecommunications provider first.

In addition, CFV can be controlled by typing the following AT commands:

!ATCF<forwarded-number>: activate call forwarding to the designated number.

!ATCF: deactivate call forwarding.

Reminder Ring (USA NI-1 & DMS-100 switch)

The reminder ring function is used in conjunction with call forwarding. Your omni.net will alert you every time a call has been forwarded by sending a short ring to your telephone, just to let you know that your calls are being forwarded.

Message Waiting (USA NI-1 & DMS-100 switch)

The Message Waiting feature is designed to work in conjunction with the voice mail service provided by your telephone company.

If you have a waiting message, the B1 and B2 LED indicators on the front panel of your omni.net ISDN TA will be blinking. Then you can retrieve your message from your voicemail.

To deactivate the Message Waiting service, use the AT command 'ATMW'.

Call Transfer (USA NI-1 & DMS-100 switch)

To transfer incoming calls (after you answer this call) follow these steps:

Step 1. Press the flash key to put the caller on hold.

Step 2. When you hear the dial tone, simply dial the number you want, to transfer the first call.

5-7