Chapter 11 Voice
•G.729 is an
Pulse dialing sends a series of clicks to the local phone office in order to dial numbers.3
11.2.8 MWI (Message Waiting Indication)Enable Message Waiting Indication (MWI) enables your phone to give you a message– waiting (beeping) dial tone when you have a voice message(s). Your VoIP service provider must have a messaging system that sends message waiting status SIP packets as defined in RFC 3842.
11.2.9 Custom Tones (IVR)IVR (Interactive Voice Response) is a feature that allows you to use your telephone to interact with the ZyXEL Device. The ZyXEL Device allows you to record custom tones for the Caller Ringing Tone and On Hold Tone functions. The same recordings apply to both the caller ringing and on hold tones.
Table 52 Custom Tones Details
LABEL | DESCRIPTION |
Total Time for All Tones | 128 seconds for all custom tones combined |
|
|
Time per Individual Tone | 20 seconds |
|
|
Total Number of Tones | 8 |
Recordable | You can record up to 8 different custom tones but the total time must be |
| 128 seconds or less. |
|
|
11.2.9.1 Recording Custom Tones
Use the following steps if you would like to create new tones or change your tones:
1Pick up the phone and press “****” on your phone’s keypad and wait for the message that says you are in the configuration menu.
2Press a number from 1101~1108 on your phone followed by the “#” key.
3Play your desired music or voice recording into the receiver’s mouthpiece. Press the “#” key.
4You can continue to add, listen to, or delete tones, or you can hang up the receiver when you are done.
11.2.9.2Listening to Custom Tones
Do the following to listen to a custom tone:
3.The ZyXEL Device does not support pulse dialing at the time of writing.
| 153 |
|
|