Chapter 13 Phone Usage
13.5 Checking the ZyXEL Device’s IP Address
Do the following to listen to the ZyXEL Device’s current IP address.
1Pick up your phone’s receiver.
2Press “****” on your phone’s keypad and wait for the message that says you are in the configuration menu.
3Press “5” followed by the # key.
4Listen to the IP address and make a note of it.
5Hang up the receiver.
13.6Auto Provisioning and Auto Firmware Upgrade
If your service provider uses an
•On a phone connected to the device, enter “*99**”, your SIP number, “*”, the HTTP pincode you were given, then “#”.
•For example, if your SIP number is 0123456 and the HTTP pincode you were given is 9876, you would enter “*99**0123456*9876#”.
During
•Press “*99#” to upgrade the ZyXEL Device’s firmware.
•Press “#99#” to not upgrade the ZyXEL Device’s firmware.
13.7Phone Functions Summary
The following table shows the key combinations you can enter on your phone’s keypad to use certain features.
Table 73 Phone Functions Summary
ACTI | FUNCTION | DESCRIPTION | |
ON | |||
|
| ||
**** | IVR | Use this to set up Interactive Voice Response. IVR allows | |
|
| you to record custom caller ringing tones (the sound a | |
|
| caller hears before you pick up the phone) and on hold | |
|
| tones (the sound someone hears when you put their call | |
|
| on hold). See Section 11.2.9 on page 153. | |
|
|
| |
#### | Internal call | Call the phone(s) attached to the ZyXEL Device’s other | |
|
| PHONE port. See Appendix A on page 375. | |
|
|
| |
*99** | HTTP pincode | Use this if your service provider gave you a personal | |
|
| identification number to enter in order to start using the | |
|
| service. See Section 13.6 on page 192. | |
|
|
| |
*99# | Enable firmware update | Use these to upload or not upload new firmware to the | |
|
| ZyXEL Device, if requested by your service provider. See | |
#99# | Disable firmware update | ||
|
| ||
|
|
|
192 |
| |
| ||
|
|
|