Chapter 27 Tools
27.4 Firmware Upgrade Screen
Click Maintenance > Tools to open the Firmware screen. Follow the instructions in this screen to upload firmware to your ZyXEL Device. The upload process uses HTTP (Hypertext Transfer Protocol) and may take up to two minutes. After a successful upload, the system will reboot. See Section 27.9 on page 354 for upgrading firmware using FTP/TFTP commands.
Do NOT turn off the ZyXEL Device while firmware upload is in progress!
Figure 204 Firmware Upgrade
The following table describes the labels in this screen.
Table 160 Firmware Upgrade
LABEL | DESCRIPTION |
Current | This is the present Firmware version and the date created. |
Firmware |
|
Version |
|
|
|
File Path | Type in the location of the file you want to upload in this field or click Browse ... to |
| find it. |
|
|
Browse... | Click Browse... to find the .bin file you want to upload. Remember that you must |
| decompress compressed (.zip) files before you can upload them. |
|
|
Upload | Click Upload to begin the upload process. This process may take up to two |
| minutes. |
|
|
After you see the Firmware Upload in Progress screen, wait two minutes before logging into the ZyXEL Device again.
| 347 |
|
|