Chapter 20 Static Route
Figure 167 Static Route
The following table describes the labels in this screen.
Table 115 | Static Route | |
LABEL |
| DESCRIPTION |
# |
| This is the number of an individual static route. |
|
|
|
Active |
| This field shows whether this static route is active (Yes) or not (No). |
|
|
|
Name |
| This is the name that describes or identifies this route. |
|
|
|
Destination |
| This parameter specifies the IP network address of the final destination. Routing is |
|
| always based on network number. |
|
|
|
Netmask |
| This parameter specifies the IP network subnet mask of the final destination. |
|
|
|
Gateway |
| This is the IP address of the gateway. The gateway is a router or switch on the same |
|
| network segment as the device's LAN or WAN port. The gateway helps forward |
|
| packets to their destinations. |
|
|
|
Modify |
| Click the edit icon to go to the screen where you can set up a static route on the |
|
| ZyXEL Device. |
|
| Click the delete icon to remove a static route from the ZyXEL Device. A window |
|
| displays asking you to confirm that you want to delete the route. |
|
|
|
Apply |
| Click this to apply your changes to the ZyXEL Device. |
|
|
|
Cancel |
| Click this to return to the previously saved configuration. |
|
|
|
Select a static route index number and click Edit. The screen shown next appears. Use this screen to configure the required information for a static route.
288 |
| |
| ||
|
|
|