Chapter 18 VPN Screens
When there is outbound traffic but no inbound traffic, the SA times out automatically after two minutes. A tunnel with no outbound or inbound traffic is "idle" and does not timeout until the SA lifetime period expires. See Section 18.6 on page 241on keep alive to have the ZyXEL Device renegotiate an IPSec SA when the SA lifetime expires, even if there is no traffic.
Figure 147 VPN: SA Monitor
The following table describes the fields in this screen.
Table 99 VPN: SA Monitor
LABEL | DESCRIPTION |
No | This is the security association index number. |
|
|
Name | This field displays the identification name for this VPN policy. |
|
|
Encapsulation | This field displays Tunnel or Transport mode. |
|
|
IPSec Algorithm | This field displays the security protocol, encryption algorithm, and authentication |
| algorithm used in each VPN tunnel. |
|
|
Disconnect | Select one of the security associations, and then click Disconnect to stop that |
| security association. |
|
|
Refresh | Click Refresh to display the current active VPN connection(s). |
|
|
258 |
| |
| ||
|
|
|