Chapter 15 Firewall Configuration

 

Table 80 Firewall: Edit Rule (continued)

 

LABEL

DESCRIPTION

 

 

Source/Destination

 

 

 

Address

 

 

 

 

 

 

 

Address Type

Do you want your rule to apply to packets with a particular (single) IP, a range of

 

 

 

IP addresses (for instance, 192.168.1.10 to 192.169.1.50), a subnet or any IP

 

 

 

address? Select an option from the drop-down list box that includes: Single

 

 

 

Address, Range Address, Subnet Address and Any Address.

 

 

 

 

 

 

Start IP Address

Enter the single IP address or the starting IP address in a range here.

 

 

 

 

 

 

End IP Address

Enter the ending IP address in a range here.

 

 

 

 

 

 

Subnet Mask

Enter the subnet mask here, if applicable.

 

 

 

 

 

 

Add >>

Click Add >> to add a new address to the Source or Destination Address box.

 

 

 

You can add multiple addresses, ranges of addresses, and/or subnets.

 

 

 

 

 

 

Edit <<

To edit an existing source or destination address, select it from the box and click

 

 

 

Edit <<.

 

 

 

 

 

 

Delete

Highlight an existing source or destination address from the Source or

 

 

 

Destination Address box above and click Delete to remove it.

 

 

 

 

 

 

Services

 

 

 

 

 

 

 

Available/ Selected

Please see Appendix F on page 417 for more information on services available.

 

 

Services

Highlight a service from the Available Services box on the left, then click Add

 

 

 

>> to add it to the Selected Services box on the right. To remove a service,

 

 

 

highlight it in the Selected Services box on the right, then click Remove.

 

 

 

 

 

 

Edit Customized

Click the Edit Customized Services link to bring up the screen that you use to

 

 

Service

configure a new custom service that is not in the predefined list of services.

 

 

 

 

 

 

Schedule

 

 

 

 

 

 

 

Day to Apply

Select everyday or the day(s) of the week to apply the rule.

 

 

 

 

 

 

Time of Day to

Select All Day or enter the start and end times in the hour-minute format to

 

 

Apply (24-Hour

apply the rule.

 

 

Format)

 

 

 

 

 

 

 

Log

 

 

 

 

 

 

 

Log Packet Detail

This field determines if a log for packets that match the rule is created or not. Go

 

 

Information

to the Log Settings page and select the Access Control logs category to have

 

 

 

the ZyXEL Device record these logs.

 

 

 

 

 

 

Alert

 

 

 

 

 

 

 

Send Alert

Select the check box to have the ZyXEL Device generate an alert when the rule

 

 

Message to

is matched.

 

 

Administrator When

 

 

 

Matched

 

 

 

 

 

 

 

Back

Click Back to return to the previous screen.

 

 

 

 

 

 

Apply

Click Apply to save your customized settings and exit this screen.

 

 

 

 

 

 

Cancel

Click Cancel to exit this screen without saving.

 

 

 

 

 

 

215

P-2602H(W)(L)-DxA User’s Guide