Chapter 11 Voice
Table 56 Phone > Analog Phone
LABEL | DESCRIPTION |
PSTN Line (“L” | Select this if you want to receive phone calls from the PSTN line (that do not use |
models only) | the Internet) on this phone port. If you select more than one source for incoming |
| calls, there is no way to distinguish between them when you receive phone calls. |
| Note: When the ZyXEL Device does not have power, regardless of |
| the settings you configure, only the phone connected to the |
| PHONE 1 port can be used for making calls. Ensure you |
| know which phone this is, so that in case of emergency you |
| can make outgoing calls. |
|
|
Apply | Click this to save your changes and to apply them to the ZyXEL Device. |
|
|
Cancel | Click this to set every field in this screen to its |
|
|
Advanced Setup | Click this to edit the advanced settings for this phone port. The Advanced Analog |
| Phone Setup screen appears. |
|
|
11.9 Advanced Analog Phone Setup Screen
Use this screen to edit advanced settings for each phone port. To access this screen, click Advanced Setup in VoIP > Phone > Analog Phone.
Figure 94 Phone > Analog Phone > Advanced
162 |
| |
| ||
|
|
|