|
| Chapter 21 Bandwidth Management |
| Table 122 Bandwidth Management: Rule Setup (continued) | |
| LABEL | DESCRIPTION |
| Bandwidth (kbps) | Specify the maximum bandwidth allowed for the rule in kbps. The |
|
| recommendation is a setting between 20 kbps and 20000 kbps for an individual |
|
| rule. |
|
| If you want to leave some bandwidth for traffic that does not match a bandwidth |
|
| filter, make sure that the interface’s root class has more bandwidth than the sum |
|
| of the bandwidths of the interface’s bandwidth management rules. |
|
|
|
| Add | Click this button to save your rule. It displays in the following table. |
|
|
|
| # | This is the number of an individual bandwidth management rule. |
|
|
|
| Rule Name | This is the name of the rule. |
|
|
|
| Destination Port | This is the port number of the destination. 0 means any destination port. |
|
|
|
| Priority | This is the priority of this rule. |
|
|
|
| Bandwidth (kbps) | This is the maximum bandwidth allowed for the rule in kbps. |
|
|
|
| Modify | Click the Edit icon to go to the screen where you can edit the rule. |
|
| Click the Remove icon to delete an existing rule. |
|
|
|
| Apply | Click Apply to save your changes back to the ZyXEL Device. |
|
|
|
| Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
|
Click the Edit icon or User defined in the Service field to configure a bandwidth management rule. Use bandwidth rules to allocate specific amounts of bandwidth capacity (bandwidth budgets) to specific applications and/or subnets.
Figure 172 Bandwidth Management Rule Configuration
| 295 |
|
|