Chapter 20 Static Route
Figure 168 Static Route Edit
The following table describes the labels in this screen.
Table 116 Static Route Edit
LABEL | DESCRIPTION |
Active | This field allows you to activate/deactivate this static route. |
|
|
Route Name | Enter the name of the IP static route. Leave this field blank to delete this static |
| route. |
|
|
Destination IP | This parameter specifies the IP network address of the final destination. Routing is |
Address | always based on network number. If you need to specify a route to a single host, |
| use a subnet mask of 255.255.255.255 in the subnet mask field to force the network |
| number to be identical to the host ID. |
|
|
IP Subnet Mask | Enter the IP subnet mask here. |
|
|
Gateway IP | Enter the IP address of the gateway. The gateway is a router or switch on the same |
Address | network segment as the device's LAN or WAN port. The gateway helps forward |
| packets to their destinations. |
|
|
Back | Click Back to return to the previous screen without saving. |
|
|
Apply | Click Apply to save your changes back to the ZyXEL Device. |
|
|
Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
| 289 |
|
|