Chapter 12 VoIP Trunking
Figure 106 VoIP > Trunking > Peer Call
Each field is described in the following table.
Table 69 VoIP > Trunking > Peer Call
LABEL | DESCRIPTION |
Outgoing | You need to set up accounts for the peer devices you use in VoIP trunking. This is |
Authentication | the IP address of the remote peer device, as well as the username and password |
| needed to authenticate with the remote peer device. |
|
|
# | This is an index number of your outgoing authentication accounts. |
|
|
Name | Enter a descriptive name for the remote peer device of this account. For example, |
| if the peer device is located in London, you might enter London as the account |
| name. This name is used when you configure call rules in the VoIP > Trunking > |
| Call Rules screen. |
|
|
Username | Enter the username needed to authenticate at the remote peer device. The |
| remote peer device must have the same username in an incoming authentication |
| entry in order to authenticate your connection. Enter up to 32 alphanumeric |
| characters. |
|
|
180 |
| |
| ||
|
|
|