Chapter 11 Voice

Each field is described in the following table.

Table 57 Phone > Analog Phone > Advanced

LABEL

DESCRIPTION

Analog Phone

Select Phone1 or Phone2 in this field to configure each analog phone port.

 

 

Voice Volume

 

Control

 

 

 

Speaking Volume

Enter the loudness that the ZyXEL Device uses for speech that it sends to the

 

peer device.

 

-1 is the quietest, and 1 is the loudest.

 

 

Listening Volume

Enter the loudness that the ZyXEL Device uses for speech that it receives from

 

the peer device. -1 is the quietest, and 1 is the loudest.

 

 

Echo Cancellation

 

 

 

G.168 Active

Select this if you want to eliminate the echo caused by the sound of your voice

 

reverberating in the telephone receiver while you talk.

 

 

Dialing Interval

 

Select

 

 

 

Dialing Interval

Enter the number of seconds the ZyXEL Device should wait after you stop dialing

Select

numbers before it makes the phone call. The value depends on how quickly you

 

dial phone numbers.

 

If you select Active Immediate Dial in VoIP > Phone > Common, you can press

 

the pound key (#) to tell the ZyXEL Device to make the phone call immediately,

 

regardless of this setting.

 

 

Voice Active

 

Detector

 

 

 

Active VAD

Select this if the ZyXEL Device should stop transmitting when you are not

 

speaking. This reduces the bandwidth the ZyXEL Device uses.

 

 

Auto Dial

 

 

 

Active Auto Dial

Select this if you want the ZyXEL Device to automatically dial the phone number

 

you enter in the Auto Dial Phone Number field as soon as you take the phone off

 

the hook.

 

 

Auto Dial Phone

If you select Active Auto Dial, enter the phone number you want the ZyXEL

Number

Device to automatically dial in this field.

 

 

Back

Click this to return to the Analog Phone screen without saving your changes.

 

 

Apply

Click this to save your changes.

 

 

Cancel

Click this to set every field in this screen to its last-saved value.

 

 

11.10 Common Phone Settings Screen

Use this screen to activate and deactivate immediate dialing and set up call fallback. To access this screen, click VoIP > Phone > Common.

 

163

P-2602H(W)(L)-DxA User’s Guide