Chapter 12 VoIP Trunking
Each field is described in the following table.
Table 68 VoIP > Trunking > General
LABEL | DESCRIPTION |
Enable Trunking | Select this to turn on VoIP trunking on your ZyXEL Device. |
|
|
Auto Attendant | This is the setting which determines how long the ZyXEL Device waits for a caller |
Timeout | to enter a phone number when it receives the call. Enter the number of seconds |
| before the Auto Attendant times out. The default value is 10 seconds and entering |
| 0 does not change the default. Enter a value from 1 to 255 seconds. |
| When the auto attendant times out, the phone directly connected to the ZyXEL |
| Device rings. |
|
|
Dialing | Enter the number of seconds the ZyXEL Device should wait after you stop dialing |
Interval(sec) | numbers before it makes the phone call. The value depends on how quickly you |
| dial phone numbers. The default value is 3 seconds and entering 0 does not |
| change the default. Enter a value from 1 to 255 seconds. |
|
|
Enable Auto | Select this to enable authentication for calls coming into your ZyXEL Device. This |
Attendant | is similar to enabling a PIN (Personal Identification Number) that callers must |
Authentication | enter to forward calls via your ZyXEL Device. |
|
|
Password | This is the PIN callers have to enter via their phone pad when dialing into your |
| ZyXEL Device to forward calls through it. Enter a number between 1 and 32 digits |
| long. |
|
|
Apply | Click this to save your changes and to apply them to the ZyXEL Device. |
|
|
Cancel | Click this to reset the fields. |
|
|
12.6 Trunking Peer Call Screen
Use this screen to set up outgoing authentication accounts for forwarding calls through peer devices (without proxy) and incoming authentication accounts for forwarding calls from peer devices. To access this screen, click VoIP > Trunking > Peer Call.
| 179 |
|
|