P-661H/HW Series User’s Guide

Figure 56 Wireless: Static WEP Encryption

The following table describes the wireless LAN security labels in this screen.

Table 38 Wireless: Static WEP Encryption

LABEL

DESCRIPTION

 

 

Security Mode

Choose Static WEP from the drop-down list box.

 

 

Passphrase

Enter a Passphrase (up to 32 printable characters) and clicking Generate. The ZyXEL

 

Device automatically generates a WEP key.

WEP Key

The WEP keys are used to encrypt data. Both the ZyXEL Device and the wireless

 

clients must use the same WEP key for data transmission.

 

If you want to manually set the WEP key, enter any 5, 13 or 29 characters (ASCII

 

string) or 10, 26 or 58 hexadecimal characters ("0-9", "A-F") for a 64-bit, 128-bit or

 

256-bit WEP key respectively.

Apply

Click Apply to save your changes back to the ZyXEL Device.

 

 

Cancel

Click Cancel to reload the previous configuration for this screen.

 

 

Advanced

Click Advanced Setup to display the Wireless Advanced Setup screen and edit

Setup

more details of your WLAN setup.

6.4.3 WPA-PSK/WPA2-PSK

In order to configure and enable WPA(2)-PSK authentication; click Network > Wireless LAN to display the General screen. Select WPA-PSKor WPA2-PSKfrom the Security Mode list.

Chapter 6 Wireless LAN

115