ZyXEL Communications P-661HW manual 333

		P-661H/HW Series User’s Guide
Table 142 Firewall Commands (continued)
FUNCTION	COMMAND	DESCRIPTION
	config edit firewall set <set	This command sets a rule to have the ZyXEL
	#> rule <rule #> destaddr-	Device check for traffic with a particular subnet
	subnet <ip address> <subnet	destination (defined by IP address and subnet
	mask>	mask).
	config edit firewall set <set	This command sets a rule to have the ZyXEL
	#> rule <rule #> destaddr-	Device check for traffic going to this range of
	range <start ip address> <end	addresses.
	ip address>
	config edit firewall set <set	This command sets a rule to have the ZyXEL
	#> rule <rule #> TCP destport-	Device check for TCP traffic with this
	single <port #>	destination address. You may repeat this
		command to enter various, non-consecutive
		port numbers.
	config edit firewall set <set	This command sets a rule to have the ZyXEL
	#> rule <rule #> TCP destport-	Device check for TCP traffic with a destination
	range <start port #> <end port	port in this range.
	#>
	config edit firewall set <set	This command sets a rule to have the ZyXEL
	#> rule <rule #> UDP destport-	Device check for UDP traffic with this
	single <port #>	destination address. You may repeat this
		command to enter various, non-consecutive
		port numbers.
	config edit firewall set <set	This command sets a rule to have the ZyXEL
	#> rule <rule #> UDP destport-	Device check for UDP traffic with a destination
	range <start port #> <end port	port in this range.
	#>
Delete
	config delete firewall e-mail	This command removes all of the settings for
		e-mail alert.
	config delete firewall attack	This command resets all of the attack
		response settings to their defaults.
	config delete firewall set	This command removes the specified set from
	<set #>	the firewall configuration.
	config delete firewall set	This command removes the specified rule in a
	<set #> rule<rule #>	firewall configuration set.

Appendix G 333