|
| ||
| Table 40 Wireless: WPA/WPA2 | ||
|
|
|
|
| LABEL | DESCRIPTION |
|
|
|
|
|
| Cancel | Click Cancel to reload the previous configuration for this screen. |
|
|
|
|
|
| Advanced Setup | Click Advanced Setup to display the Wireless Advanced Setup screen and edit |
|
|
| more details of your WLAN setup. |
|
To configure advanced wireless settings, click the Advanced Setup button in the General screen. The screen appears as shown.
Figure 59 Wireless LAN: Advanced
The following table describes the labels in this screen.
Table 41 Wireless LAN: Advanced
LABEL | DESCRIPTION |
|
|
Wireless Advanced Setup | |
|
|
RTS/CTS | Enter a value between 0 and 2432. If you select the Enable 802.11g+ mode |
Threshold | checkbox, this field is grayed out and the ZyXEL Device uses 4096 automatically. |
Fragmentation | It is the maximum data fragment size that can be sent. Enter a value between 256 |
Threshold | and 2432. If you select the Enable 802.11g+ mode checkbox, this field is grayed out |
| and the ZyXEL Device uses 4096 automatically. |
Output Power | Set the output power of the ZyXEL Device in this field. This control changes the |
| strength of the ZyXEL Device's antenna gain or transmission power. Antenna gain is |
| the increase in coverage. Higher antenna gain improves the range of the signal for |
| better communications. If there is a high density of APs within an area, decrease the |
| output power of the ZyXEL Device to reduce interference with other APs. |
| The options are Maximum, Middle and Minimum. |
|
|
Chapter 6 Wireless LAN | 119 |