ZyXEL Communications P-661HW 3.2.2 Manually assign a WEP key, 3.2.1Manually assign a WPA-PSKkey, key, Next, WPA-PSK, Pre- Shared Key, Manually assign a, Manually assign a WEP key

P-661H/HW Series User’s Guide

Note: The wireless stations and ZyXEL Device must use the same SSID, channel ID

and WEP encryption key (if WEP is enabled), WPA-PSK (if WPA-PSK is enabled) for wireless communication.

4This screen varies depending on the security mode you selected in the previous screen. Fill in the field (if available) and click Next.

3.2.1Manually assign a WPA-PSK key

Choose Manually assign a WPA-PSK key in the Wireless LAN setup screen to set up a Pre- Shared Key.

Figure 30 Manually assign a WPA key

The following table describes the labels in this screen.

Table 18 Manually assign a WPA key

LABEL	DESCRIPTION
Pre-Shared	Type from 8 to 63 case-sensitive ASCII characters. You can set up the most secure
Key	wireless connection by configuring WPA in the wireless LAN screens. You need to
	configure an authentication server to do this.
Back	Click Back to display the previous screen.
Next	Click Next to proceed to the next screen.
Exit	Click Exit to close the wizard screen without saving.

3.2.2 Manually assign a WEP key

Choose Manually assign a WEP key to setup WEP Encryption parameters.

Chapter 3 Wizards 69