Figure 165 System General Setup
The following table describes the labels in this screen.
Table 114 System General Setup
LABEL | DESCRIPTION |
|
|
General Setup |
|
|
|
System Name | Choose a descriptive name for identification purposes. It is recommended you enter |
| your computer’s “Computer name” in this field. This name can be up to 30 |
| alphanumeric characters long. Spaces are not allowed, but dashes |
| underscores "_" are accepted. |
Domain Name | Enter the domain name (if you know it) here. If you leave this field blank, the ISP |
| may assign a domain name via DHCP. |
| The domain name entered by you is given priority over the ISP assigned domain |
| name. |
Administrator | Type how many minutes a management session (either via the web configurator or |
Inactivity Timer | CLI (Command Line Interpreter)) can be left idle before the session times out. The |
| default is 5 minutes. After it times out you have to log in with your password again. |
| Very long idle timeouts may have security risks. A value of "0" means a |
| management session never times out, no matter how long it has been left idle (not |
| recommended). |
Password |
|
|
|
User Password | If you log in with the user password, you can only view the ZyXEL Device status. |
| The default user password is user. |
New Password | Type your new system password (up to 30 characters). Note that as you type a |
| password, the screen displays a (*) for each character you type. After you change |
| the password, use the new password to access the ZyXEL Device. |
Retype to | Type the new password again for confirmation. |
Confirm |
|
276 | Chapter 19 System |