The following table describes the fields in this screen.
Table 13 Internet Setup Wizard: ISP Parameters (PPPoE)
LABEL | DESCRIPTION |
|
|
User Name | Enter the user name exactly as your ISP assigned. If assigned a name in the form |
| user@domain where domain identifies a service name, then enter both components |
| exactly as given. |
Password | Enter the password associated with the user name above. |
|
|
Service Name | Type the name of your PPPoE service here. Leave this field blank if your ISP did not |
| provide you a PPPoE service. |
Back | Click Back to go back to the previous screen. |
|
|
Apply | Click Apply to finish manual configuration. The ZyXEL Device tries to detect the |
| connection again. See Section 3.1 on page 60. |
Exit | Click Exit to close the wizard screen without saving your changes. |
|
|
This screen appears if your Internet connection uses RFC1483 encapsulation in routing mode.
Figure 24 Internet Setup Wizard: ISP Parameters (RFC1483 + Routing Mode)
The following table describes the fields in this screen.
Table 14 Internet Setup Wizard: ISP Parameters (RFC1483 + Routing Mode)
LABEL | DESCRIPTION |
|
|
IP Address | Enter the static IP address provided by your ISP. |
|
|
Back | Click Back to go back to the previous screen. |
|
|
Apply | Click Apply to finish manual configuration. The ZyXEL Device tries to detect the |
| connection again. See Section 3.1 on page 60. |
Exit | Click Exit to close the wizard screen without saving your changes. |
|
|
This screen appears if your Internet connection uses PPPoA encapsulation.
64 | Chapter 3 Wizards |