P-661H/HW Series User’s Guide

The following table describes the labels in this screen.

Table 42

OTIST

 

 

LABEL

DESCRIPTION

 

 

Setup Key

Type an OTIST Setup Key of exactly eight ASCII characters in length.

 

The default OTIST setup key is "01234567".

 

Note: If you change the OTIST setup key here, you must also

 

make the same change on the wireless client(s).

Yes!

If you want OTIST to automatically generate a WPA-PSK, you must:

 

Change your security to any security other than WPA-PSKin the Wireless

 

LAN > General screen.

 

Select the Yes! checkbox in the OTIST screen and click Start.

 

The wireless screen displays an auto generated WPA-PSK and is now in WPA-

 

PSK security mode.

 

The WPA-PSK security settings are assigned to the wireless client when you

 

start OTIST.

 

If you already have a WPA-PSK configured in the Wireless LAN > General

 

screen, and you run OTIST with Yes! selected, OTIST will use the existing

 

WPA-PSK.

Start

Click Start to encrypt the wireless security data using the setup key and have

 

the ZyXEL Device set the wireless client to use the same wireless settings as

 

the ZyXEL Device. You must also activate and start OTIST on the wireless

 

client at the same time.

 

The process takes three minutes to complete.

6.5.1.2 Wireless Client

On your wireless client, start the ZyXEL utility and click the Adapter tab. Select the OTIST check box, enter the same Setup Key as your AP’s and click Save.

Figure 61 Example Wireless Client OTIST Screen

122

Chapter 6 Wireless LAN