ZyXEL Communications P-661HW 17.9 TR-069 (P-661HOnly), Note:, a.b.c.d, Table 112 on page

P-661H/HW Series User’s Guide

17.9 TR-069 (P-661H Only)

TR-069 is a protocol that defines how your ZyXEL Device can be managed via a management server such as ZyXEL’s Vantage CNM Access.

An administrator can use CNM Access to remotely set up the ZyXEL Device, modify settings, perform firmware upgrades as well as monitor and diagnose the ZyXEL Device. All you have to do is enable the device to be managed by CNM Access and specify the CNM Access IP address or domain name and username and password.

Follow the procedure below to configure your ZyXEL Device to be managed by CNM Access. See the Command Interpreter appendix for information on the command structure and how to access the CLI (Command Line Interface) on the ZyXEL Device.

Note: In this example a.b.c.d is the IP address of CNM Access. You must change this value to reflect your actual management server IP address or domain name. See Table 112 on page 261for detailed descriptions of the commands.

Figure 149 Enabling TR-069

ras> wan tr069 load

ras> wan tr069 acsUrl a.b.c.d Auto-Configuration Server URL: http://a.b.c.d ras> wan tr069 periodicEnable 1

ras> wan tr069 informInterval 2400 TR069 Informinterval 2400

ras> wan tr069 active 1 ras> wan tr069 save

The following table gives a description of TR-069 commands.

Table 112 TR-069 Commands

Root	Command or	Command	Description
	Subdirectory
wan	tr069		All TR-069 related commands must be preceded by wan
			tr069.
		load	Start configuring TR-069 on your ZyXEL Device.
		active [0:no/	Enable/disable TR-069 operation.
		1:yes]
		acsUrl <URL>	Set the IP address or domain name of CNM Access.
		username	Username used to authenticate the device when making a
		[maxlength:15]	connection to CNM Access. This username is set up on
			the server and must be provided by the CNM Access
			administrator.
		password	Password used to authenticate the device when making a
		[maxlength:15]	connection to CNM Access. This password is set up on the
			server and must be provided by the CNM Access
			administrator.

Chapter 17 Remote Management Configuration 261