Table 142 Firewall Commands (continued)
FUNCTION | COMMAND | DESCRIPTION |
|
|
|
|
|
|
| config edit firewall | This command sets the source |
| of the firewall | |
|
|
|
| config edit firewall | This command sets the |
| which the firewall | |
|
|
|
| config edit firewall | This command sets how frequently the firewall |
| policy <full hourly daily | log is sent via |
| weekly> |
|
|
|
|
| config edit firewall | This command sets the day on which the |
| day <sunday monday tuesday | current firewall log is sent through |
| wednesday thursday friday | ZyXEL Device is set to send it on a weekly |
| saturday> | basis. |
|
| |
|
|
|
| config edit firewall | This command sets the hour when the firewall |
| hour | log is sent through e- mail if the ZyXEL Device |
|
| is set to send it on an hourly, daily or weekly |
|
| basis. |
|
|
|
| config edit firewall | This command sets the minute of the hour for |
| minute | the firewall log to be sent via e- mail if the |
|
| ZyXEL Device is set to send it on a hourly, |
|
| daily or weekly basis. |
|
|
|
Attack | config edit firewall attack | This command enables or disables the |
| immediate sending of DOS attack notification | |
|
| |
|
|
|
| config edit firewall attack | Set this command to yes to block new traffic |
| block <yes no> | after the |
|
| exceeded. Set it to no to delete the oldest half- |
|
| open session when traffic exceeds the tcp- |
|
| |
|
|
|
| config edit firewall attack | This command sets the number of minutes for |
| new sessions to be blocked when the tcp- | |
|
| |
|
| command is only valid when block is set to |
|
| yes. |
|
|
|
| config edit firewall attack | This command sets the threshold rate of new |
| ||
|
| ZyXEL Device starts deleting old |
|
| sessions until it gets them down to the minute- |
|
| low threshold. |
330 | Appendix G |