status only. Click Login to proceed to a screen asking you to change your password or click Cancel to revert to the default password.
Figure 6 Password Screen
6If you entered the user password, skip the next two steps and refer to Section 2.4.2 on page 51 for more information about the Status screen.
7If you entered the admin password, it is highly recommended you change the default admin password! Enter a new password between 1 and 30 characters, retype it to confirm and click Apply; alternatively click Ignore to proceed to the main menu if you do not want to change the password now.
Note: If you do not change the password at least once, the following screen appears every time you log in with the admin password.
Figure 7 Change Password at Login
8The next screen depends on which password (admin or user) you used in step 5. Select Go to Wizard setup, and click Apply to display the wizard main screen. Select Go to Advanced setup or View Device Status, and click Apply to display the Status screen. Select Change Password if you want to change the user password.
46 | Chapter 2 Introducing the Web Configurator |