P-661H/HW Series User’s Guide

Figure 28 Wireless LAN Setup Wizard 1

The following table describes the labels in this screen.

Table 16 Wireless LAN Setup Wizard 1

LABEL

DESCRIPTION

 

 

Active

Select the check box to turn on the wireless LAN.

 

 

Enable OTIST

Select the check box to enable OTIST if you want to transfer your ZyXEL

 

Device’s SSID and WPA-PSK security settings to wireless clients that support

 

OTIST and are within transmission range.

 

You must also activate and start OTIST on the wireless client at the same time.

 

The process takes three minutes to complete.

 

Note: Enable OTIST only if your wireless clients support WPA

 

and OTIST

Setup Key

Type an OTIST Setup Key of up to eight ASCII characters in length. Be sure to

 

use the same OTIST Setup Key on the ZyXEL Device and wireless clients.

Back

Click Back to display the previous screen.

 

 

Next

Click Next to proceed to the next screen.

 

 

Exit

Click Exit to close the wizard screen without saving.

3Configure your wireless settings in this screen. Click Next.

Chapter 3 Wizards

67