22.2 DSL Line Diagnostic
Click Maintenance > Diagnostic > DSL Line to open the screen shown next.
Figure 179 Diagnostic: DSL Line
The following table describes the fields in this screen.
Table 121 Diagnostic: DSL Line
LABEL | DESCRIPTION |
|
|
ATM Status | Click this button to view ATM status. |
|
|
ATM Loopback | Click this button to start the ATM loopback test. Make sure you have configured at |
Test | least one PVC with proper VPIs/VCIs before you begin this test. The ZyXEL Device |
| sends an OAM F5 packet to the DSLAM/ATM switch and then returns it (loops it |
| back) to the ZyXEL Device. The ATM loopback test is useful for troubleshooting |
| problems with the DSLAM and ATM network. |
DSL Line Status | Click this button to view the DSL port’s line operating values and line bit allocation. |
|
|
Reset ADSL | Click this button to reinitialize the ADSL line. The large text box above then displays |
Line | the progress and results of this operation, for example: |
| "Start to reset ADSL |
| Loading ADSL modem F/W... |
| Reset ADSL Line Successfully!" |
Capture All Logs | Click this button to display all logs generated by the DSL line. |
|
|
292 | Chapter 22 Diagnostic |